Systems
REDIWA CAT 9
The Rediwa CAT 9-S is a non-visible system for extruded tiles with single-point mechanical fixing that stands out for its safety, discretion, and installation versatility. The anchoring is achieved with aluminum clips whose tabs are inserted into the upper and lower edges of the tile or through its holes. Clips are attached to the aluminum substructure using stainless steel screws.
Thicknesses: from 16 mm to 30 mm.
The Rediwa CAT 9-T is the variant designed for panels that incorporate a groove on the back, configured by the tile manufacturer. In this case, the aluminum clips are inserted into that groove. Clips can be custom-made according to the characteristics of each panel, ensuring the system compatibility and safety.
Thicknesses: from 16 mm to 20 mm.
SYSTEM DETAILS
- MECHANICAL PART
CAT 9 “S” refers to a fastening at the top of the tile. The clip tabs are fitted into the panel’s edges or holes, while in the “T” version of the system, they are directly inserted into the back groove. In both cases, the clips are fixed to the aluminum substructure using stainless steel screws, ensuring a firm and concealed attachment.
- CHEMICAL PART
An elastic MS-type adhesive is applied between the back of the panel and the vertical substructure. This adhesive acts as an additional safety element, absorbing vibrations caused by wind, compensating for material expansion, and preventing detachment in case of accidental breakage.